Recovery mode

If you notice issues or unusual behavior, especially after a firmware update, recovery mode may help.

To enter recovery mode:

1. Turn off Aidlab
2. Press and hold the power button for about 6 seconds until the LED turns purple

You’ll then have three options:

• Diagnostics mode
  Hold the button for 3 seconds

  • red light — problem detected
  • green light — everything is working correctly
    After a few seconds, the LED will return to purple

• Factory reset
  Press the button 4 times quickly
  The LED will turn white, then after a few minutes turn green — the device will be ready to use

• Exit recovery mode
  Hold the button for about 10 seconds to reset Aidlab
  After releasing, the LED should return to a blinking green state

If the LED turns red during diagnostics or none of the options help, contact contact@aidlab.com.